, Metallurgy and Materials Science Research Institute, Chulalongkorn University, Thailand
-
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Application of Electron Channeling Contrast Mode to Study the Recrystallization Process in Nickel Alloy after Different Thermomechanical Processing Conditions
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Analysis of Creep Behavior in an Annealed Nickel Based Alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
Electrospinning Process of Molten Polypropylene in Vacuum
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
A Study of Chitosan Coating on Different types of Natural Fiber by Scanning Electron Microscopy (SEM)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 2 (2001) - Original Research Articles
The use of sols in tape casting for PZT ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Original Research Articles
Photodegradation of Epoxy Paint Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
DEMINERRALIZED BONE PARTICLES
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
Forming of Electronic Substrate from alumina by Doctor blade Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
The Application of rice husk ask for silicagel adsorbent production
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Crease Resistance Finishing of Cotton Fabric with Citric Acid
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
The Crosslinking of Chitosan Film Using Glutaraldehyde as a Crosslinking Agent
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Effect of wet and dry milling on properties of sintered hydroxyapatite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Forming of Electronic Substrate from alumina by Doctor blade Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
EFFECT OF FORMING PARAMETERS ON HOT WORKING PROCESS IN NICKEL BASE ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
TEM ANALYSIS OF DISLOCATION SUBSTRUCTURE DEVELOPMENT AFTER THERMOMECHANICAL PROCESSING IN NICKEL BASED ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
MICROSTRUCTURE DEVELOPMENT BY HOT AND COLD WORKING PROCESSES IN NICKEL BASED ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
THE STUDY OF ISOTHERMAL AND ANISOTHERMAL DEFORMATION BEHAVIORS ON WROUGHT POLYCRYSTALLINE NICKEL BASED SUPERALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Wear Resistance of Vanadium Carbide Coating Layer Coated by TD Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECT OF RE-HEAT TREATMENT CONDITIONS ON MICROSTRUCTURAL REFURBISHMENT OF NICKEL BASED SUPERALLOY TURBINE BLADES, IN-738, AFTER LONG-TERM SERVICE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECT OF HIP PARAMETERS ON MICROSTRUCTURAL REPAIR AND REJUVENATION IN LONG-TERM SERVICED SUPERALLOY TURBINE BLADE, IN-738
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
Preparation and Characterization of Sol-Gel ZnkIn2Ok+3 Transparent Conducting Thin Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
Study of Method to Grinding Fired Alumina Ceramic
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Original Research Articles
Effects of Nitrogen on Pitting Corrosion of AISI 304 and AISI 316L Austenitic Stainless Steel Weld Metals in NACE and 3.5% NaCl Solution
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Effect of surfactant on conductivity of poly(pyrrole-co-formyl pyrrole) via emulsion polymerization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
Multilayered systems of nanostructured TiB2 thin films and its mechanical properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Techniques to improve coating adhesion of superhard coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Powder injection moulding of cemented carbides: Feedstock preparation and injection moulding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Finite element analysis study on effect of indenter tip radius to nanoindentation behavior and coatings properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Effect of limestone dust on the properties of Thai pottery sintering at low temperature
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Surface modification of bricks by chitosan coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Review Articles
Current status of nanotechnology consumer products and nano-safety issues
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Kinetic study of chitosan-alginate biopolymeric nanoparticles for the controlled release of curcumin diethyl disuccinate
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Academic Articles
Fibrillation Behaviour of Lyocell
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Interfacial polymerization of water-soluble polyaniline and its assembly using the layer-by-layer technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Development of flame retardant polyphosphoric acid coating based on the polyelectrolyte multilayers technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Analysis of Low Cycle Fatigue Behavior in a Nickel Based Superalloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Comparison of ball-on-disc and Taber wear tests in assessing wear performance of electrolessly-deposited alloys
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Influence of hot-dip coatings on mechanical and corrosion behaviors of steel bolts
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Utilization of fly ash from power plant for adsorption of hydrocarbon contamination in water
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
The Role of Cation Exchange Capacity on the Formation of Polystyrene-Clay Nanocomposites by In-situ Intercalative Polymerization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Effect of Final Cold Rolled Microstructures on Creep Deformation Behavior in Nickel Base Alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Original Research Articles
ALTERNATIVE RAW MATERIALS FOR MANUFACTURING FLAT PRODUCTS BY E.AF. ROUTE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Microstructural development of galvanized steels prepared with Ni-P electroless deposited pre-coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
pH dependant coating for microfluidics devices
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Effects of crosslinking agent and biological properties of silk fibroin/gelatin/chitosan ternary system electrospun nanofiber mats.
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
STRESS EVOLUTION IN NICKEL BASED SINGLE CRYSTAL SUPERALLOY SUBJECTED TO THERMAL CYCLING
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Improved L-929 cell growth from self assembled PDADMAC/gelatin thin films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
STUDY ON TRANSFORMATION BEHAVIOUR OF BULK Si-Mn TRIP STEEL
Abstract PDF