, Thailand
-
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Improvement on cost-performance ratio of fiberglass/carbon fiber hybrid composite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Analysis of the impact factors from the friction stir welding process for dissimilar butt joints between semi-solid cast aluminum 356 and AISI 1018 carbon steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Thermal behavior of solid acids in the Rb3H(SO4)2-RbHSO4 system under ambient atmosphere
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Eco-friendly lake pigment from sappanwood: Adsorption study and its application as natural colorant for natural rubber toy balloon
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Microstructure and properties of zirconia-alumina composites fabricated via powder injection molding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 1 (2021) - Original Research Articles
Enhancing stability and antioxidant efficacy of fisetin by encapsulating as β-cyclodextrin inclusion complex with porous polylactic acid film from breath figure
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Sustainable valorization of sugarcane leaves for succinic acid and biochar production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Using shrimp shells as based catalysts for FAME production from palm oil feedstock
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Debinding behaviour and sintering temperature-dependent features of coloured zirconia fabricated by ceramic injection moulding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Effects of annealing treatment on microstructure and hardness in the 28 wt% Cr cast iron with Mo/W addition
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Preparation of transparent alumina thin films deposited by RF magnetron sputtering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Development of chemically grafted multiwall carbon nanotube onto cellulose fiber sheet and polyurethane based resin composite for an active paper
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Investigation of deposition parameters on the structural properties and hardness of TiAlN films deposited via reactive pulsed DC magnetron sputteringInvestigation of deposition parameters on structural properties and hardness of TiAlN films deposited by reactive pulsed DC magnetron sputtering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Electrochromic property of tungsten trioxide films prepared by DC magnetron sputtering with oblique angle deposition and thermal oxidation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Influence of cooling conditions on microstructure and mechanical property of Sn-0.3Ag-0.7Cu lead-free solder
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Improving corrosion resistance of 3D printed Ti-6Al-4V by TiN coating
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 2 (2021) - Original Research Articles
Improvement of alkali resistance of glass fiber from basalt and lignite bottom ash mixture by addition of ZrO2 content
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Effects of ball milling duration and sintering temperature on mechanical alloying Fe3Si
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Raman Signal Enhancement of Low-Cost Metal Sheet SERS with Gold Decoration
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Extraction of cellulose nanofibers from empty palm fruit bunches via mechanical defibrillation
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Experimental and numerical characterization of fatigue crack propagation in high-speed railway wheel ER8 steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Oxidation behavior of Sn-1 wt% Bi alloy in air and deionized water at room temperature
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Influence of six-step heat treatment on microstructures and mechanical properties of 5160 alloy steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Developments of biodegradable polymer based on polylactic acid (PLA) with natural color extracts for packaging film applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Biodiesel production from waste cooking oil using a new heterogeneous catalyst SrO doped CaO nanoparticles
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Influence of precursor preparation on the synthesis of boron carbide from glutinous rice flour
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Formation of nano-crystalline chromium-zirconium nitride (Cr-Zr-N) film coating by DC unbalanced magnetron sputtering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Effects of delay time and curing temperature on compressive strength and porosity of ground bottom ash geopolymer mortar
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Effect of zinc-hydroxo species on the growth of one-dimensional ZnO nanostructures
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Investigation of optimum parameters for rotary friction welding of aluminum round bars using three-level factorial design methodology
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Utilization of silicon dioxide powder from industrial wastes as novel filler in rubber isolator application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Characteristic of fluorescence spectroscopy response of tetrakis (4-sulfonatophenyl) porphyrin doped polyaniline toward Fe3+ ion
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
The finished polyester fabric with hot NH4OH pretreatment and mixed ZnO-Zn(OH)2 nanoparticles for hydrophobic property
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Stress softening characteristics of thin monoholar rubber flat slab
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Enhanced mechanical and thermal properties of fly ash-based geopolymer composites by wollastonite reinforcement
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Synthesis and optical properties of forsterite ceramic pigments using mirror wastes as a flux
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Retaining the high-temperature phases of Rb3H(SO4)2 and Rb5H3(SO4)4 at room temperature
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Poly(vinyl)alcohol film composited with carbon dots from water hyacinth stalks based on gamma irradiation for the UV blocking film
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Photoelectrochemical cathodic protection of amorphous zinc oxide coating on hot rolled steel SS400 in a 3 wt% NaCl solution and a Na2S-NaOH solution
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Effect of Al Addition on Crystal Structure of AlGaN/GaN on GaAs (001) Substrate Grown by Metalorganic Vapor Phase Epitaxy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Epoxidized natural rubber/silane modified silica nanocomposites prepared in latex stage
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Synthesis and phosphate adsorption performance of elephant dung biochar modified with magnesium and iron
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Use of oil palm frond waste to reinforce poly(lactic acid) based composites with the improvement of interfacial adhesion by alkali treatment
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Facile synthesis of heterostructured g-C3N4/Ag -TiO2 photocatalysts with enhanced visible-light photocatalytic performance
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Effect of pre-carbonization temperature on the porous structure and electrochemical properties of activated carbon fibers derived from kapok for supercapacitor applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 1 (2022) - Original Research Articles
Bio-composite of nipa palm husk derived activated carbon/poly(butylene succinate): an effective agricultural waste based adsorbent for ammonia removal
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
The Structure and ferromagnetism of carbon nanofibers from polyacrylonitrile/ polyvinylpyrrolidone
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Extraction of molybdenum from a spent HDS catalyst using alkali leaching reagent
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Recovery of nickel from spent electroplating solution by hydrometallurgical and electrometallurgical process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Enhanced photocatalytic activity of ZnO nanostructures deposited on mesh through electrochemical deposition and thermal oxidation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Brazilein modified zinc oxide nanorods with enhanced visible light-responsive photocatalytic efficiency
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Effects of sputtering power of Ti films on morphology of TiO2 nanotubes synthesized via anodization process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Utilization of freeze thaw process for polyvinyl alcohol/sodium alginate (PVA/SA) hydrogel composite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Development of aggregate from bottom ash in environmentally friendly concrete
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Amino-containing polymer-coated magnetite nanoparticles as nano-adsorbents for bisphenol A: Synthesis, kinetic and thermodynamic study
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 32 No. 2 (2022) - Original Research Articles
Recycling of exhausted dust from regenerator of glass furnace in glass batch melting
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
The correlation between phase formation and the structure of the pellets with the fungal immobilization study as a commercial substrate culture/planting material
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Multi-responsive rotaxane with tunable fluorescence under azobenzene-based benzoxazine structure
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Synthesis and antimicrobial studies of nano-copper doped carbon substrates; activated carbon, reduced graphene oxide, and carbon nanofiber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Preparation of feedstock containing water-soluble binder for powder injection moulding of silver
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Thermal Properties and Moisture Absorption of LDPE/Banana Starch Biocomposite Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Effect of Chemical Treatment on the Characteristics of Shrimp Chitosan
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Chemical Recycling of Rigid Polyurethane Foam Scrap via Base Catalyzed Aminolysis
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Effect of Activation by Alkaline Solution on Properties of Activated Carbon from Rubber Wood
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Heat Effect on Viscosity and Curing of Light-Cured Dental Resin and Mechanical Strength of Conventional Dental Composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Effects of Particle Size and Amount of Carbon Black and Calcium Carbonate on Curing Characteristics and Dynamic Mechanical Properties of Natural Rubber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 1 (2002) - Original Research Articles
Oxide One Pot Synthesis of a Novel Titanium Glycolate and Its Pyrolysis
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
An Initial Study of Starch-g-polystyrene Foam Prepared by a Steaming Process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Gelation Behaviors and Mechanical Properties of Silicone Resins for A Breast Model Application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Anti-tarnishing, Microstructure analysis and Mechanical properties of Sterling silver with silicon addition
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
Syndiotactic Polystyrene Synthesis using Polymer-Supported Titanocene Catalysts
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Effect of Starting Material Ratio, Heating Temperature and Time on the Morphology of Na A zeolite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Application of Electron Channeling Contrast Mode to Study the Recrystallization Process in Nickel Alloy after Different Thermomechanical Processing Conditions
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
A Preliminary Study on the Preparation of Environmentally Friendly Materials from Modified Glutinous Starch
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Analysis of Creep Behavior in an Annealed Nickel Based Alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
Maximum Hydrostatic Stress Analysis of Multi-Pass Inclusion Copper Wire Drawing by FEM
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
Electrospinning Process of Molten Polypropylene in Vacuum
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
Photoluminescence of extremely thin InGaAs/InP Single Quantum Wells grown by Organometallic Vapor Phase Epitaxy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
Synthesized nanocomposite TiN/a-SiNx films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
พื้นฐานการเป็น"นิค"ของประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
แผนพัฒนาทรัพยากรแร่และพลังงานในแผนพัฒนาเศรษฐกิจและสังคมแห่งชาติ ฉบับที่ 6
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - เทคโนโลยีก้าวหน้า
เทคโนโลยีก้าวหน้า
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
วัสดุโลหะสำหรับเก็บกักไฮโดรเจนเพื่อระบบพลังงานในอนาคต
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
เทคโนโลยีเรื่องพลวงในประเทศสาธารณรัฐประชาชนจีน
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
อุตสาหกรรมสิ่งทอไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
Quantum Confinement Effect of Alq3/ZnSe Heterostructures
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
Nanotechnology Activities in Thailand: Present and Future Perspectives
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 1 (2003) - Original Research Articles
The Role of Cation Exchange Capacity on the Formation of Polystyrene-Clay Nanocomposites by In-situ Intercalative Polymerization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
ทิศทางของอุตสาหกรรมเหมืองแร่ในอนาคต
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic News
คุยเฟื่องเรื่องดีบุก
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic News
Academic News
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Research Output
สถานภาพ ปัญหา และแนวทางการแก้ไขปัญหาอุตสาหกรรมเซรามิกส์
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
ศูนย์พัฒนาพลาสติกไทย พัฒนาคุณภาพของผลิตภัณฑ์พลาสติก
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 1 (1991) - Academic Articles
สารพันการโลหะ วัสดุ และแร่
Details PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - เทคโนโลยีก้าวหน้า
วัสดุพลาสติกกับการพัฒนาอุตสาหกรรมชิ้นส่วนรถยนต์
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - เทคโนโลยีก้าวหน้า
การใช้ประโยชน์ของโพลิสไตรีนในอุตสาหกรรม
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Research Output
case study ในงานวิเคราะห์เกี่ยวกับการแตกหักและการศึกษาคุณสมบัติของวัสดุ
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
Superfine Powder
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
"การก่อสร้างบนดวงจันทร์" การแข่งขันทางการวิจัยของบริษัทก่อสร้างญี่ปุ่น
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
The Application of Microwave Energy in Drying, Calcining and Firing of Ceramics
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
การใช้แผ่นเหล็กวิลาสในอุตสาหกรรมกระป๋อง
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
แร่อิลเมไนต์ของประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
CORROSION
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
การใช้ Zn - Alloy แทน Zn เพื่อเคลือบแผ่นเหล็กที่ใช้ในรถยนต์
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic Articles
กรรมวิธีผลิตและคุณสมบัติของแผ่นเหล็กเคลือบดีบุก ปี 1998
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic News
สยามสตีลกรุ๊ปจี้บีไอโอเร่งโครงการผลิตเหล็กหวันลุงแซมเจ้าตลาดส่งออกใช้เทรดบิลล์บีบคอ
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Original Research Articles
กระบวนการผลิตเหล็กหล่อการไฟต์เบไนต์ (1)
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 1 No. 2 (1992) - Academic News
สารพันการโลหะ วัสดุ และแร่
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
สภาวะของอุตสาหกรรมเหล็กของโลกในปี 1986 และแนวโน้มในอนาคต
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
สถานภาพอุตสาหกรรมเหล็กในประเทศอาเซียน
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
การผลิตและเทคโนโลยีอุตสาหกรรมเหล็กในประเทศญี่ปุ่นระหว่างปี 1988
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
สถานภาพอุตสาหกรรมเหล็กในประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
แนวทางการจัดการทรัพยากรธรณี
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
Ferrites
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic Articles
กระบวนการไฮโดรเมทัลเลอร์จีกับแร่พลวง
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 1 (1992) - Academic News
สารพันการโลหะ วัสดุ และแร่
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Effect of Heat Treatments after HIP Process on Microstructure Refurbishment in Cast Nickel-Based Superalloy, IN-738
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Physical and Rheological Properties of Asphalts Modified with Polyethylene-co-methylacrylate and Acids
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Solvent Extraction Study of Rare Earths from Nitrate Medium by the Mixtures of TBP and D2EHPA in Kerosene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Effects of Silicon Powder Size on the Processing of Reaction-Bonded Silicon Nitride
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
Enzymatic Degradation of Chitosan using Staphylococcus pecies strain TUOOS (E) Chitinase
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
A Study of Chitosan Coating on Different types of Natural Fiber by Scanning Electron Microscopy (SEM)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
The Effect of the Utilization of Chitosan on Properties of Paper
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
LOCAL VARIATION IN THE DEACETYLATION OF CUTTLEFISH CHITIN STRIP
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 1 (2000) - Original Research Articles
ULTRAFILTRATION OF CHEESE WHEY USING CHITOSAN MEMBRANE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 2 (2001) - Original Research Articles
Processing of Liquid Crystal Polymer Reinforced Polyethylene Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 2 (2001) - Original Research Articles
3 Ways to MgAl204 Spinel Powders Used as a Humidity Sensor
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 2 (2001) - Original Research Articles
The use of sols in tape casting for PZT ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 10 No. 2 (2001) - Original Research Articles
Reactive Blending of Polyethylene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 2 (2002) - Original Research Articles
Machinability of Heat Treated Silicon Powder Compacts
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 2 (2002) - Original Research Articles
Investigation of the Passive Film Formed on SUS 304 Stainless Steel Exposed in an Urban-industrial Atmosphere
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 2 (2002) - Original Research Articles
Properties of Post-used High Density Polyethylene Crates and Its Modification by Ethylene Vinyl Acetate Blending
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 2 (2002) - Original Research Articles
Prepolymer Synthesis of Polyester by Using Lipase as a Catalyst
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 2 (2002) - Original Research Articles
Comparisons of Various Spinodal Decompositions Theories to Small Angle Light Scattering Experiments of Tetramethyl-Bisphenol A-Polycarbonate and Polystyrene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 1 (2001) - Original Research Articles
Dynamic Vertebral body Prosthesis: A new invention and its biomechanical study
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 1 (2001) - Original Research Articles
Biomaterials : an Overview
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 1 (2001) - Original Research Articles
Comparative study of the three mechanical properties between the metal stylet of plastic angiocath and kirschner wire of equal diameter
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 1 (2001) - Original Research Articles
Marginal adaptation and flexural strength of a leucite reinforced dental glass ceramic
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 11 No. 1 (2001) - Original Research Articles
Biomechanical Study on the Constructs of Bone Cement Incorporate with Screw for Anterior Spinal Stabilization: Comparison between the construct versus normal spine
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
วัสดุเสริมแรง
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
การใช้ประโยชน์วัสดุพอลิเมอร์ในการผ่าตัดกระดูก
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
เครื่องแยกแร่แม่เหล็กที่ใช้ในอุตสาหกรรมเหมืองแร่
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Research Output
Elastic - Plastic Fracture Toughness ของเหล็กหล่อและความสัมพันธ์กับรูปทรงของกราไฟต์และปริมาณของเพียรไลต์ในเนื้อพื้น
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
Thermoplastic Elastomer, TPE
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
สถานภาพ และศักยภาพทางเทคโนโลยีของการผลิตชิ้นส่วน วิศวกรรมจากโลหะ
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
ความต้องการถ้วยชามและแนวโน้มการแข่งขัน
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Research Output
โครงการสัมมนาและควบคุมคุณภาพดินขาวที่เหมาะสม
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Research Output
SOLVENT TEXTURIZATION ON PET YARNS
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
สารพันการโลหะ วัสดุ และแร่
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
CARBON CARBON COMPOSITE (Part I) (AN ULTRAHIGH - TEMPERATURE COMPOSITE)
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
การประยุกต์ใช้งานของการเคลือบพ่นผิวด้วยพลาสม่า
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
สภาวะการผลิตและการส่งออกสินค้าเซรามิกส์ในปัจจุบัน
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
เครื่องแยกแร่แม่เหล็กที่ใช้ในอุตสาหกรรมเหมืองแร่ (ต่อ)
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Research Output
The Combination of Apatite - Wollastonite Glass Ceramic and Bone Morphogenic Protein
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 2 No. 2 (1993) - Academic Articles
CONTROL OF PIPELINE CORROSION
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
APPLICATION OF CORROSION PROTECTION BY PAINTING
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Research Output
Machanical Proporty Improvement of PET Yarns by Solvent Setting
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 1 (1993) - Academic Articles
สารพันการโลหะ วัสดุ และแร่
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Academic Articles
สถานภาพและอนาคตของอุตสหากรรมเซรามิกส์และเทคโนโลยีทางเซรามิกส์ในประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Academic Articles
อุตสาหกรรมเหล็กในประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Academic Articles
วิวัฒนาการของวัสดุในการทำแม่พิมพ์และวิธีเลือกใช้
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Academic Articles
โครงการศูนย์ข้อมูลเศรษฐกิจอุตสหกรรมโลหะวัสดุ
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Academic Articles
แนวโน้มและการพัฒนาของเครื่องทอผ้าระบบไร้กระสวย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 3 No. 2 (1994) - Research Output
Potential Use of Basalt from Thailand in Mineral Fibre Production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
ADHESIVES
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
MATERIALS AND CORROSION SOCIETY OF THAILAND
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
มาตรฐานการถ่ายทอดและการส่งผ่านข้อมูลสำหรับงานอุตสาหกรรมวัสดุในอนาคต
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
สภาวะเทคโนโลยีการผลิตเหล็กกล้าในประเทศญี่ปุ่น
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
ชัยชนะของเหล็กกล้า
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
ข้อเสนอแนะสำหรับการพัฒนาวิทยาศาสตร์และเทคโนโลยีของไทยเพื่อความอยู่รอดในศตวรรษที่ 21
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 1 (1994) - Academic Articles
Matallurgical Factors Effecting External Corrosion of Tinplate Cans in Chloride Environment
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Academic Articles
กระบวนการผลิตวัสดุเสริมแรงชนิด RESIN TRANSFER MOLDING (RTM)
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Academic Articles
REINFORCED THERMOPLASTICS
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Academic Articles
Controlled Rolling of steel
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Research Output
การใช้สารประกอบดีบุกอนินทรีย์เป็นสารหน่วงการติดไฟในโพลิยูรีเทน
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Original Research Articles
การเคลือบฟิล์มบางโมลิบดินัม โดยวิธีดีซีแมกนิตรอนสปัตเตอริง
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Original Research Articles
Production of Antimony Trioxide from Antimony Ore by Hydrometallurgical Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 4 No. 2 (1995) - Original Research Articles
Photodegradation of Epoxy Paint Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Academic Articles
Energy Dispersive Spectrometer (EDS)
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Original Research Articles
Synthesis of Unsaturated Polyester Resin from PET Waste Bottles
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Original Research Articles
การผลิตวัตถุดิบอะลูมินาจากดินขาว
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Original Research Articles
Extraction of Tin form Tin Sludge by Sodium Hydroxide Leaching
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Academic Articles
สถานภาพเทคโนโลยีอุตสาหกรรมพลาสติกเสริมแรงในประเทศไทย
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Academic Articles
ความยืดหยุ่นหนืดแบบไม่เป็นเชิงเส้นของพอลิเมอร์
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Academic Articles
วัสดุเครื่องมือตัด
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Original Research Articles
การผลิตเหล็กพรุนจากสเกลโรงรีดด้วยวิธีการไดเร็กรีดักชั่น
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Original Research Articles
การใช้ Copper stearate เป็น photoinitiator เพื่อผลิตพลาสติกที่สลายตัวด้วยแสง
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Original Research Articles
Equilibrium Diagrams of Y-Ba-Cu-O System at 950 Degrees Celsius
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 5 No. 2 (1996) - Academic Articles
แนะนำห้องสมุด สถาบันวิจัยโลหะและวัสดุ
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Academic Articles
Teflon -- World's slipperiest Substance -- was discovered by accident!
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Academic Articles
เทคโนโลยีการผลิตเครื่องมือตัด
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Academic Articles
สารให้สีสำหรับพลาสติก
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Academic Articles
เหล็กแผ่นรีดเย็น
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Original Research Articles
PHOTOOXIDATIVE DEGRADATION OF POLYOLEFIN FILMS
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Original Research Articles
การเคลือบวาเนเดียมคาร์ไบด์บนผิวเหล็กทำแม่พิมพ์ด้วยกระบวนการ TD
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 1 (1996) - Original Research Articles
Electrowinning of Tin from Leach Solution of Tin Sludge
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
CURRENT ASPECTS OF SPINE PROBLEMS
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
FAIL BACK SURGERY SYNDROME (FBSS)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
FAILED LUMBAR SPINAL SURGERY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
THE ROLE OF CERAMICS IN SPINE STABILIZATION
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
BONE CEMENT AND CLINICAL APPLICATION IN SPINAL SURGERY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
BONE CEMENT INCORPORATION WITH SCREWS FOR ANTERIOR STABILIZATION OF THE SPINE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
ROLE OF METAL IN SPINE STABILIZATION
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
OBSERVATION OF THE FAILED INSTRUMENTATION OF THE SPINE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
BIOMATERIAL ASPECTS OF FAILED SPINAL IMPLANTS
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Original Research Articles
POLYETHELENE WEAR AND OSTEOLYSIS
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
REVISION TKR
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
DEVELOPMENT OF NEW BONE CEMENT
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
DEMINERRALIZED BONE PARTICLES
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
BONE MORPHOGENETIC PROTEIN
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
High Temperature Properties of Wrought Nickle base Superalloy in creep - fatigue conditions
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 6 No. 2 (1997) - Academic Articles
Forming of Electronic Substrate from alumina by Doctor blade Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
The Application of rice husk ask for silicagel adsorbent production
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Crease Resistance Finishing of Cotton Fabric with Citric Acid
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
The Crosslinking of Chitosan Film Using Glutaraldehyde as a Crosslinking Agent
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Effect of wet and dry milling on properties of sintered hydroxyapatite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 1 (1997) - Academic Articles
Forming of Electronic Substrate from alumina by Doctor blade Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Original Research Articles
An Equilibrium Theory on Separation Via Thermal Parametric Pump : Part II
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Academic Articles
Modeling of Temperature Change of Liquid Steel in BOF by Neural Network
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Academic Articles
Mechanism od Diesel Exhaust Gas Abatement by Synthetic Zeolite ZSM-5
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Academic Articles
Sinterred ZnO:AI Sputtering Target for Transparent Conducting Film Preparation
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Academic Articles
Refinement of Primary Sillicon in Hypereutectic Aluminum-Silicon Alloys
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 7 No. 2 (1998) - Academic Articles
Heat Sealing of Polypopylene Film in Flexible Packaging
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
EFFECT OF FORMING PARAMETERS ON HOT WORKING PROCESS IN NICKEL BASE ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
TEM ANALYSIS OF DISLOCATION SUBSTRUCTURE DEVELOPMENT AFTER THERMOMECHANICAL PROCESSING IN NICKEL BASED ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
MICROSTRUCTURE DEVELOPMENT BY HOT AND COLD WORKING PROCESSES IN NICKEL BASED ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
Silica-Gelatin N anocomposite as a Carrier for Enzyme Immobilization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
THE STUDY OF ISOTHERMAL AND ANISOTHERMAL DEFORMATION BEHAVIORS ON WROUGHT POLYCRYSTALLINE NICKEL BASED SUPERALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
Preparation of Organophilic Montmorillonite and its Application in Alkyd Coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
Iron Complexes for Oligomerization of Hexene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
Separation of PET from PET&PVC Mixture by Froth Flotation Technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 1 (2005) - Original Research Articles
Utilization of Chitosan for Organic Shrimp Production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 1 (2005) - Original Research Articles
Profitable Spin-off from Using Chitosan in Orchid Farming in Thailand
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 1 (2005) - Original Research Articles
Biocompatibility of Chitin Derivatives In Vitro
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 1 (2005) - Original Research Articles
Overcoming Chitosan Hydrogen Bond Network: Another Aspect of Chitosan Nanomaterial
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 1 (2005) - Original Research Articles
Chitin and Chitosan: Production and Application Research Asian Institute of Technology 1994-2004
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
Novel Organic/Inorganic Composites for Coating Applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
Preliminary Experiment of Low Molar Mass Thermotropic Liqid Crytal as a Plasticizer of Polycarbonates
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
An Equilibrium Theory on Separation Via Thermal Parametric Pump : Part III. The Model Equations
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
Calcined Bone Ash Filled Polyethylene Composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
Comparative Performance between Cu/Na-ZSM-5 and Cu/H-ZSM-5 in NO Abatement
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 1 (1998) - Academic Articles
Effect of Sand Properties and Pouring Temperature on Casting Defect
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Wear Resistance of Vanadium Carbide Coating Layer Coated by TD Process
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Effect of Extractants on Copper Ion Extraction with Hollow Fiber Supported Liquid Membranes
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Hot Deformation of Low Carbon Steel in Ferritic Range
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Effects of Small Molecular Solvent on Phase Diagram of Polymer Blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Domestic Lab Feasibility Study of NiTinol Preparations
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECTS OF PARTICLE SIZE AND POWDER PACKING ON THE SiC FORMING REACTION OF Si AND C
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECTS OF SODIUM PHOSPHATE AND SODIUM SULPHATE ON CORROSION RESISTANCE OF AISI 316L STAINLESS STEEL IN 3.5 wt% SODIUM CHLORIDE SOLUTION
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECTS OF AGING CONDITIONS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES IN IRON-BASED ALLOY
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECT OF RE-HEAT TREATMENT CONDITIONS ON MICROSTRUCTURAL REFURBISHMENT OF NICKEL BASED SUPERALLOY TURBINE BLADES, IN-738, AFTER LONG-TERM SERVICE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
FABRICATION AND PHYSICAL PROPERTIES OF NiMn 204, Zn0+0.02Ti02 AND FeNb04 AS THERMOELECTRIC, HEATING ELEMENT AND NEGATIVE TEMPERATURE COEFFICIENT MATERIALS
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
BATCH SIMULATION OF RARE EARTHS EXTRACTIVE SEPARATION BY DI (2-ETHYLHEXYL) PHOSPHORIC ACID AND TRIBUTYLPHOSPHATE IN KEROSENE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
EFFECT OF HIP PARAMETERS ON MICROSTRUCTURAL REPAIR AND REJUVENATION IN LONG-TERM SERVICED SUPERALLOY TURBINE BLADE, IN-738
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
High Temperature Tensil Properties of Hot-Pressed Inconel 718
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
Preparation and Characterization of Sol-Gel ZnkIn2Ok+3 Transparent Conducting Thin Films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
Study of Method to Grinding Fired Alumina Ceramic
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
The Relationship between Crystallinity and Degree of Deacetylation of Chitin from Crab Shell
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 9 No. 1 (1999) - Original Research Articles
Sulfur Removal from Steel Using CaO-SiO2-Al2O3 Slag
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Original Research Articles
Effects of Nitrogen on Pitting Corrosion of AISI 304 and AISI 316L Austenitic Stainless Steel Weld Metals in NACE and 3.5% NaCl Solution
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Academic Articles
Fibrillation Behaviour of Lyocell
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Original Research Articles
Phase Transformations of NiTinol Memory Alloys by DSC
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Original Research Articles
EFFECT OF ZINC ON WETTING PROPERTIES OF 14 CARAT BRAZING ALLOYS
Abstract PDF () -
Journal of Metals, Materials and Minerals Vol. 9 No. 2 (2000) - Original Research Articles
One Pot Solvothermal Synthesis of Thermally Stable, Porous Silica-Modified Alumina Powders by Supercritical Removal of Organic Solvents
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Review Articles
Progress of water desalination applications based on wettability and surface characteristics of graphene and graphene oxide: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
The Influence of Different Crystal Modifiers on Ultra-Low Embodied Energy Curing Fiber-Reinforced Cement Composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Sequential injection analysis for mercury ion with modified screen – printed carbon electrode
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 3 (2022) - Original Research Articles
Extraction, characterization, and improvement of banana stem and water hyacinth cellulose fibers as reinforcement in cementitious composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Extraction of lutein dye from Tagetes erecta garland waste for green dyeing of hemp fabric using response surface methodology
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Ecological dyeing of acrylic yarn with colorant derived from natural lac dye
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Development of FexOy particle onto bacterial cellulose network by forced hydrolysis and its electrical conductivity
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Erratum
Erratum to: In search for near-room-temperature superconducting critical temperature of metal superhydrides under high pressure: A review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Morphology and electrochromic property of chemical bath deposited NiO films at different NiSO4 concentration
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Preparation of bacterial cellulose film from rotten fruits for mulching film application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Effect of pore modifiers on physical and mechanical properties of high-performance cement mortar
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
The effects of double intercritical annealing on microstructure and mechanical properties of 0.107C-2.39Mn-0.453Si dual phase steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Optimized parameter of dissimilar joining between Al6061-T6 and height-strength steel with friction stir spot welding process (FSSW)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Utilization of rubber tree bark as a carbon source for electric arc furnace steelmaking: Carbon/slag interaction at 1550℃
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Green acidic catalyst from cellulose extracted from sugarcane bagasse through pretreatment by electron beam irradiation and subsequent sulfonation for sugar production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Sugarcane waste-derived activated carbon for lithium-sulfur batteries with enhanced performance by thiourea doping
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Preparation of spent coffee grounds-rubber composites using natural rubber latex as binder
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Dyeing of curcumin and durable press finishing with citric acid on cotton fabric using one step process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Original Research Articles
Magnetic nanoparticles coated with zwitterionic copolymer as an advanced material for rapid and instrument-free biomolecular detection in human serum
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
The high temperature degradation of ferritic stainless steel in solid carbon atmospheres
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Adhesion of thermal oxide scale formed on silicon-containing hot-rolled steel oxidised in oxygen
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Recovery of pure silver from spent silver electroplating solutions via electrochemical process and zinc cementation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Examination of the adhesion of the scale formed on hot-rolled steel with different silicon content using a tensile test
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Investigation of oxide scale adhesion on hot-rolled steel using the tensile test and acoustic emission
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Eddy current evaluation for thickness loss estimation of aluminum alloys used in aircraft structures
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Oxidation behaviour of Mn-Co spinel coating on AISI 430 ferritic stainless steel with and without Cu in Ar-CO\(_{2}\)-H\(_{2}\)O atmosphere
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Recycling of iron oxide waste by carbothermic reduction to utilize in FDM 3D printing materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Effects of Indium and Gallium ratio on tarnish resistance, corrosion and mechanical properties of 950 silver alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Synthesis of zircon pigments from rice husk ash and their performance in ceramic glaze
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Investigation of surface hardness and roughness on formability of aluminum alloy sheet AA2024-T3 subjected to the shot peening process by silica shots
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Development of inexpensive device for methanol detection in hand sanitizer gel using manganese-doped zinc sulfide quantum dots modified by N-methylpolypyrrole
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
High-temperature oxidation resistance of CrAlN thin films prepared by DC reactive magnetron sputtering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Production of autoclaved lightweight concretes using pottery stone and bagasse ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Synthesis of zinc oxide photocatalysts from zinc-dust waste for organic dye degradation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 1 (2023): March - Original Research Articles
Fabrication of glass-ceramics composite by infiltration of lithium tetraborate glass into porous magnesium aluminate spinel ceramic
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Effect of annealing temperature on the TiO\(_{2}\) anodized films properties for dental implant application
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
The electrochemical properties of water hyacinth-derived activated carbon
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Fabrication and characterizations of high density Si\(_{3}\)N\(_{4}\) - ZrO\(_{2}\) ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Structure and chemical durability improvement of alkali silicate glass by zirconium dioxide and erbium oxide addition
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
The influence of water-cement ratios and alumino-silicate based accelerator on the properties of fiber-reinforced cement composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Paper-based colorimetric sensor for mercury ion detection using smartphone digital imaging
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Enhancing the color shade and depth of linen fabrics dyed with Caesalpinia sappan L. wood extract using metallic salt mordants
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Enhanced Raman spectroscopy analysis for contamination detection on microelectronic devices using gold nanoclusters grown by DC magnetron sputtering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Fabrication of granular foam glass aggregates from soda lime silicate glass waste
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Study of corrosion properties of carbon steel, 304 and 316L stainless steels in sulfuric acid and their degradation products
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Cellulose-based fabrics triboelectric nanogenerator: Effect of fabric microstructure on its electrical output
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Biomass-based nitrogen-doped carbon/polyaniline composite as electrode material for supercapacitor devices
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Influence of water content on structural and electrochromic properties of TiO\(_{2}\) nanotube prepared by anodization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Color shading, color fastness, antibacterial and ultraviolet protection properties of silk fabric colored by silver nanoparticles
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Multipurpose fluorescent carbon dots from papaya seed waste as sensing materials for Cu\(^{2+}\) detection and diethyl ether vapor sensor via electronic nose system
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Synthesis and characterization of electron beam irradiated glutinous rice husk-derived biochar and activated carbon for aqueous electrochemical capacitors
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Effect of trisilanol isobutyl polyhedral oligomeric silsesquioxane (TPOSS) in recycled PET (rPET) and polypropylene based compound: Investigation on mechanical properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
A study of the electrical and optical properties of AZO thin film by controlling pulse frequency of HiPIMS
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Green production of simultaneous coloration and functional finishing on hemp textiles through dyeing with Diospyros mollis Griff. extract
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Ballistic performance of composite armor impacted by 7.62 mm armor projectile
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Feasibility study of coconut shell biochar production using community-scale biochar kiln
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
The changes in microstructural features and physical properties of ceramic matrix composite bonding tools under ultrasonic service
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 3 (2023): September - Original Research Articles
Synthesis of SiC nanowires on biochar surfaces by a simple direct method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Synthesis and modification of nickel hydroxide particle synthesized by self-assembly and electron beam irradiation technique for photocatalyst activity
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Improvement of specific capacity of lithium iron phosphate battery by increasing the surface area and electrical conductivity of cathode electrode using graphene foam
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Electrical and water resistance properties of conductive paste based on gold/silver composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Composition-driven phase coexistence and functional properties of the (1-x)BZT-(x)BCT ceramics near the phase convergence region
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Incorporating novel bio-mineral materials of silicone-arrowroot modified starch for compressed powder
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
LLDPE film development surface with nucleating agents to reduce fat stains from food adherence on the film surface for easy rinsing before recycling
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Fast microwave synthesis of high-silica natural soil based porous geopolymer
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 4 (2023): December - Original Research Articles
Sustainable innovation in ballistic vest design: Exploration of polyurethane-coated hemp fabrics and reinforced sandwich epoxy composites against 9 mm and .40 S&W bullets
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Integration of jackfruit seed-derived carbon dots and electronic nose for a sensitive detection of formaldehyde vapor
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Green synthesis of bimetallic CuO@NiO nanocomposite for the removal of glyphosate
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 34 No. 1 (2024): March - Original Research Articles
Possibility of using boric acid and glutinous rice flour as additive for producing silicon carbide ceramic via pressureless solid-state sintering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Extraction of tin from hardhead by oxidation and fusion with sodium hydroxide
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Tribological behavior of austenitic stainless steel and vanadium carbide coated by TRD process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Preparation of organosilane treated microcrystalline (SiMCC) and SiMCC/polypropylene composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Three-body-type abrasive wear behavior of 26% Cr cast iron with molybdenum
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Porous NiTi produced by NiTiTa transient-liquid-assisted method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
The oxidation behaviour of stainless steel AISI 409 coated By decorative nickel-chromium plating
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Failure analysis of bearings in air conditioning compressor
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Corrosion assessment of cast aluminum parts in ethanol fuel blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
Corrosion behavior of AISI 4140 steel surface coated by physical vapor deposition
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
NR/XSBR nanocomposites with carbon black and carbon nanotube prepared by latex compounding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 1 (2012) - Original Research Articles
A micromechanical flow curve model for dual phase steels
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Thermal degradation of PET fabrics coated with interpenetrating polymer network-silica fume mixtures
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Influence of casting techniques on hardness, tarnish behavior and microstructure of Ag-Cu-Zn-Si sterling silver jewelry alloys
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Preparation and catalytic property of high surface area mixed oxides from calcination of MgCuCr- and MgCuAl-layered double hydroxides
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Characterization of diamond-like carbon (DLC) films deposited by filtered cathodic vacuum arc technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Production of poly-?-glutamic acid by Bacillus licheniformis: Synthesis and characterization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Cetirizine dihydrochloride tablets comprising two different lubricants with highly loaded colloidal silicon dioxide
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Polymeric eutectic drug delivery system
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
Ballistic performance of ceramic/S2-glass composite armor
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 22 No. 2 (2012) - Original Research Articles
The effect of granule morphology and composition on the compaction behavior and mechanical properties of 92% alumina spray dried granules
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Fabrication of chitosan/titanium dioxide composites film for the photocatalytic degradation of dye
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
SiO2-included cesium polyoxotungstate catalysts for oxidation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Halogenated sorbitol derivatives using as nucleating agent and their effect on orientation of polypropylene fiber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Upconversion luminescence of yttrium oxysulfide co-doped with rare earth elements
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Parameters optimization of copper wire bonding on thin small outline package
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Titanium dioxide nanostructures synthesized by sonochemical – hydrothermal process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Application of para rubber latex mixed with organic dyes as printing ink for biodegradable plastic film
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Conversion of secondary pulp and paper sludge to glucose by hydrothermal treatment
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Influence of calcium carbonate nanoparticles on mechanical behavior of poly(lactic acid)/poly(butylene succinate) blend
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Chitosan derivative-based hemostat: Irritation, hypersensitivity and absorbability study
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Crystallization behavior of PLA in PLA/NR compared with dynamic vulcanized PLA/NR
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 1 (2013) - Original Research Articles
Dissolved oxygen sensor film using ruthenium polypyridine complex as luminophore
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Effect of heat treatment on phase transformation of TiO2 and its reflectance properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Corrosion behavior of TiAlN film on AISI 4140 steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Agronomic benefits of durian shell biochar
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Investigation of supersaturated silver alloys for high hardness jewelry application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 23 No. 2 (2013) - Original Research Articles
Comparison of ball-on-disc and Taber wear tests in assessing wear performance of electrolessly-deposited alloys
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Effects of the tempering on mechanical properties of dual phase steels
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Development of electronic packages from polypropylene/ethylene propylene rubber blends: A double percolation approach
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Preparation and characterizations of highly filled graphene-polybenzoxazine composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Property enhancement of polybenzoxazine modified with maleic anhydride
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 1 (2014) - Original Research Articles
Shape fixity and shape recovery characteristics of aliphatic epoxy-benzoxazine shape memory polymer
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Effects of poly(butylene succinate) and calcium carbonate on the physical properties of plasticized poly(vinyl chloride)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Effect of styrene-methyl methacrylate/styrene-butadiene rubber on properties of poly(vinyl chloride)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Microstructural development of galvanized steels prepared with Ni-P electroless deposited pre-coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Influence of hot-dip coatings on mechanical and corrosion behaviors of steel bolts
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Effect of surfactant on conductivity of poly(pyrrole-co-formyl pyrrole) via emulsion polymerization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 24 No. 2 (2014) - Original Research Articles
Mechanical properties of poly(lactic acid) composites reinforced with microfibrillated cellulose prepared using high speed blending
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Sandwich-type cobalt tungstophosphate: Synthesis, characterization and catalytic activity
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Peroxidase inhibition assay for the detection of some thiols by carbon screen printed electrodes based on square wave voltammetry
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Effect of temperature dropping during solution treatment during rejuvenation heat treatment on final microstructures in cast nickel base superalloy, grade Inconel-738
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Extraction and characterization of cellulose nanocrystals produced by acid hydrolysis from corn husk
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Properties of binary and ternary composites of polypropylene containing soybean oil-g-chitosan and hydrophobic phosphonated silica
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Preparation and characterization of epoxidized natural rubber and epoxidized natural rubber/carboxylated styrene butadiene rubber blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 1 (2015) - Original Research Articles
Effect of heating rate on morphology of anti-reflective TiO2 film coated by sol-gel with polyethylene glycol
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Effect of tig welding parameters on strain-age cracking in joining nickel-based superalloy, GTD-111 with Inconel 625
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Effect of temperature dropping during solution treatment in rejuvenation heat treatment on final microstructures of Udimet 520
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Mechanical properties of interpenetrating phase composites using open-cell Al foams with natural rubber and polyethylene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Microstructure based finite element simulation of JCO forming process for pipeline X65
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 2 (2016) - Original Research Articles
Petrographic analysis of ceramic artifacts from Ban Di kiln, Pattani province, Thailand
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 1 (2016) - Original Research Articles
Effect of precipitation aging temperatures on rejuvenation heat treated microstructures, hardness and γ' phase stability in Udimet-500
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 1 (2016) - Original Research Articles
X-Ray attenuation of cotton fabrics coated with barium sulphate
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 26 No. 2 (2016) - Original Research Articles
Ballistic resistance of plain woven p-aramid fabrics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Investigating rheological, morphological and mechanical properties of PBS/PBAT blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Chevron crack initiation in mullti-pass drawing of inclusion copper shaped-wire
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Self-crack closing ability of mortar with different additives
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Determination of forming limit stress diagram for formability prediction of SPCE 270 steel sheet
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
The change of surface alloy compositions and corrosion behavior after WEDM machining of commercially pure titanium (grade 4) and Ti-6Al-4V (grade 5)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Modification of montmorillonite with a cationic softener for finishing cotton fabric with hand builder performance
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Chitosan and trimethyl chitosan particles as oral vaccine delivery systems: Comparison of the potential to initiate immune responses
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Purification of an industrial aluminum alloy by melt stirring during Ohno Continuous Casting process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Corrosion prevention of rebar in concrete due to chloride
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Improving quench hardening of low carbon steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Design and construction of water atomizer for making metal powder
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Effect of postweld heat treatment on microstructures and hardness of TIG weldment between P22 and P91 steels with Inconel 625 filler metal
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Applying computer simulation in improving heat treating condition of thin high-carbon steel parts
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Separation of lycopene/solvent mixture by chitosan membranes
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Effect of nitrogen partial pressure on characteristic and mechanical properties of hard coating TiAlN Film
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Study conditions of aluminum billets for relationship between precipitated phases and homogenizing temperature with different cooling methods
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 1 (2011) - Original Research Articles
Immobilization of lipase onto Cyperus Papyrus L. for biodiesel production by transesterification and hydrolysis-esterification
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Effect of Vanadium on subcritical heat treatment behavior of hypoeutectic 16 wt% Cr cast iron containing 2 wt% Mo
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Ni electroless plating of ABS polymer by Palladium and Tin-free process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Multi-properties of chitosan/montmorillonite composite films incorporated with virgin and modified montmorillonite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Recovery of zinc from the spent zinc-carbon dry cell batteries through pyrometallurgical route
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Mechanical properties of stir-mixed SiCp-reinforced aluminium composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 21 No. 2 (2011) - Original Research Articles
Process parameter-microstructure-mechanical property relations of SiCp-reinforced aluminum composites produced by powder-injection casting
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Adhesion behavior in sliding test of austenitic stainless steel on VC coated by TRD process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Utilization of fly ash from power plant for adsorption of hydrocarbon contamination in water
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Effect of K2O/SiO2 ratio on the crystallization of leucite in silicate-based glasses
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
An investigation of microstructural change of low alloy steel AISI 4150 by Seebeck coefficient
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Pickling kinetics of tertiary oxide scale formed on hot-rolled steel strip
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Preparation of hydrophobic chitosan using complexation method for PLA/chitosan blend
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Thermal analysis of Fe-carbide and Fe-C mixtures
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Study of process parameters in conventional powder metallurgy of silver
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Effects of replacing binder with powder space holder on properties of metal injection moulded foam
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 1 (2010) - Original Research Articles
Study of covering conditions for sintering of metal injection moulded commercially pure titanium
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Pickling behavior of AISI 304 stainless steel in sulfuric and hydrochloric acid solutions
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Effect of temperature and pressure on the densification of titanium silicide compound
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Effects of aluminium on sintered properties of Cu-10wt%Sn bearing
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Development of an aluminum semi-solid extrusion process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Corrosion assessment of carbon steel in Thailand by atmospheric corrosion monitoring (ACM) sensors
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Oxidation of cyclohexane and ethylbenzene by hydrogen peroxide over co-substituted heteropolytungstate catalyst
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Versatile route for preparation of polydiacetylene/ZnO nanocomposites and their colorimetric response to pH and ethanol
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Effect of sintering on microstructure and properties of hydroxyapatite produced by different synthesizing methods
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Study on flame retardancy and anti-dripping of polyester fabric treated with bentonite, diammonium hydrogen phosphate and aluminium hydroxide
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Hardness and fracture toughness of alumina-based particulate composites with zirconia and strontia additives
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Preparation and properties of superhydrophobic cotton fabrics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Surface modification of polyester fabrics with vinyltriethoxysilane
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 20 No. 2 (2010) - Original Research Articles
Preparation and characteristics of galangal essential oil/alginate microcapsules
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Physical properties of polyolefin/bamboo charcoal composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Effect of electron donor on PE polymerization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Method for the preparation of secondary emulsions of fish oil in water
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Determination of yield behaviour of boron alloy steel at high temperature
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Interfacial polymerization of water-soluble polyaniline and its assembly using the layer-by-layer technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Mechanical property improvement of UPE resin from glycolyzed PET with commercial UPE resin
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Characterizations of fibers produced from polypropylene/silica composite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Thermoplastic cassava starch/sorbitol-modified montmorillonite nanocomposites blended with low density polyethylene: properties and biodegradability study
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Welding residual stresses in two competing single V-butt joints
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Effect of discarded pPVC contents on thermal and ultraviolet resistance of acrylonitrile butadiene rubber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 1 (2009) - Original Research Articles
Recycling of medical gown nonwoven fabric manufacturing waste as a filler for high density polyethylene
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Pozzolanic activity of rice husk ash: Comparison of various electrical methods
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Exergetic and thermoeconomic analyses of the rice-husk power plant in Thailand
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Synthesis and characterization of silicon-silicon carbide composites from rice husk ash via self-propagating high temperature synthesis
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Ziegler-Natta catalyst with high activity and good hydrogen response
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Synthesis and characterization of SiO2 nanowires prepared from rice husk ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Preparation of silica gel from rice husk ash using microwave heating
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Utilization of rice husk ash silica in controlled releasing application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Crystal habit of CaCo3 under different carbonation methods
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Synthesis of zeolite A membrane from rice husk ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Effect of black rice husk ash substituted OPC on strength and leaching of solidified plating sludge
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
Comparison of gelatin and collagen scaffolds for fibroblast cell culture
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
Properties of collagen/chitosan scaffolds for skin tissue engineering
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
Multilayered systems of nanostructured TiB2 thin films and its mechanical properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
Modified vegetable oil in textile finishing applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 1 (2006) - Original Research Articles
The relationship between reheat-treatment and hardness behaviour of cast nickel superalloy, GTD-111
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Effect of decarburization on microstructure of DC-plasma nitrided H 13 tool steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Techniques to improve coating adhesion of superhard coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
The effect of long-term thermal exposure at elevated temperatures on microstructures and mechanical properties in centrifugally casted iron-base alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Transparent coating materials based on inorganic/organic composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Development of flame retardant polyphosphoric acid coating based on the polyelectrolyte multilayers technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
pH dependant coating for microfluidics devices
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
UV radiation energy consumption in curing process of epoxidized sunflower oil-organoclay hybrid coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 16 No. 2 (2006) - Original Research Articles
Electrochemical oxidation process for mineralization of solvent
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Use of PP-g-MA prepared by solution process as compatibilizerin polypropylene/polyamide 6 blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Processing and properties of palm oil-based rigid polyurethane foam
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Removal of adsorbed moisture on iron powders by rice husk ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Powder injection moulding of cemented carbides: Feedstock preparation and injection moulding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Fatigue performance enhancement of steels using mechanical surface treatments
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Glassification of electric arc furnace dust by using fly ash or bagasse ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Microstructural characterization of aluminum powder liquid coating on IN 738 superalloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
Effect of powder mixture conditions on mechanical properties of sintered Al2O3-SS 316L composites under vacuum atmosphere
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 1 (2007) - Original Research Articles
OM study of effect of hip and heat treatments on microstructural restoration in cast nickel-based superalloy, GTD-111
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Prediction of tensile strength for sandwich injection molded short-glass-fiber reinforced thermoplastics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Fatigue performance of high-temperature deep-rolled metallic materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Finite element analysis study on effect of indenter tip radius to nanoindentation behavior and coatings properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
OM study of effect of hip and heat treatments on microstructural restoration in cast nickel based superalloy, IN-738
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Ferroelectric glass-ceramic sintering aid for lead titanate ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 17 No. 2 (2007) - Original Research Articles
Surface modification of microfluidic devices
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Effect of limestone dust on the properties of Thai pottery sintering at low temperature
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Effects of yttria concentration and microstructure on electric breakdown of yttria stabilized zirconia
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Nano-size hydroxyapatite powders preparation by wet-chemical precipitation route
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Morphology controlled calcium ortho phosphates induced by chemical additions under hydrothermal reaction
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Calcium phosphate film coating on titanium substrate by electrochemical deposition
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Surface modification of bricks by chitosan coatings
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Improved L-929 cell growth from self assembled PDADMAC/gelatin thin films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Effects of tin powder on properties of sintered stainless steels
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Sintered properties of 409L powder compacts influenced by metal powder additives
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Sintered Fe-Al2O3and Fe-SiC composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Diffusion bonding of stainless ASTM A240 grade 304 in double side flux cored arc welding
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Original Research Articles
Sintered materials prepared from stainless steel series 300 and 400 powders
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 1 (2008) - Review Articles
Current status of nanotechnology consumer products and nano-safety issues
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Preparation of ultrafine silver powder using glycerol as reducing agent
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Demonstration of the NTC ceramic application for temperature measurement and control using the LabVIEW-based measurement system
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Production of sponge rubber for monolayer rubber stamp using salt leaching method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Properties evaluation of sodium nitrite treated chitosan-cotton fabric
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Application of chitosan in rice production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Preparation of N-acetyl-D-Glucosamine Using Enzyme from Aspergillus sp.
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Preparation and characterization of particles from chitosan with different molecular weights and their trimethyl chitosan derivatives for nasal immunization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Chitosan/calcium phosphate composites scaffolds prepared by membrane diffusion process
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Chitin nanowhisker and chitosan nanoparticles in protein immobilization for biosensor applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Factors affecting preparations of chitosan microcapsules for colonic drug delivery
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Fabrication of porous bioactive glass-ceramics via decomposition of natural fibres
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Water soluble chitosan as an environment-friendly coagulant in removal of rubber particles from skim rubber latex
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 18 No. 2 (2008) - Original Research Articles
Fabrication of Al/Al2O3 composite by powder metallurgy method from aluminum and rice husk ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Antibacterial activity of ZnO nanoparticles on silica thin film for wastewater treatment
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Mechanical and thermal properties of eucalyptus fiber composites from blend between biodegradable poly(butylene succinate) and Recycled PET
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Development of WO3 nanostructure by acid treatment and annealing
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Study on physical, optical and luminescence of Er3+ in K2O-CaO-B2O3 glasses for photonic application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Super hydrophobicity of sputtered PTFE films on nanotextured aluminum surface
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Physical Optical Properties of 20CaO-(80-x)B2O3-xZnO Glass System
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Effect of glass fiber length and content on mechanical properties of polybutylene terephthalate
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Antireflective surface of nanostructures fabricated by CF4 plasma etching
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Effect of sputtering power on the structure of DC magnetron sputtered vanadium nitride thin films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Properties of natural rubber latex filled with bacterial cellulose produced from pineapple peels
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 1 (2017) - Original Research Articles
Eu3+ doped borosilicate glass for solid-state luminescence material
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Kinetic study of chitosan-alginate biopolymeric nanoparticles for the controlled release of curcumin diethyl disuccinate
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Investigation of the durability of sisal fiber/PLA biocomposite through evaluation of biodegradability by means of microbial growth
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Utilization of coal fly ash as a raw material for refractory production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 27 No. 2 (2017) - Original Research Articles
Utilization of aluminium dross as a main raw material for synthesis of geopolymer
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
A comparative study of nanofibrillated cellulose and microcrystalline cellulose as reinforcements in all-cellulose composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Review Articles
Eggshell waste: An effective source of hydroxyapatite for photocatalyst
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Enhancement of mechanical, thermal and antibacterial properties of sisal/PHBV biocomposite by fibre modification
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Consideration of key process parameters for achieving robust and uniform cutting of Ti-6Al-4V sheet metal using fiber laser with nitrogen assisted gas
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Starch consolidation of porous fused silica ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Phase separation dynamics and morphologies prediction of PEO-b-PMMA copolymer by atomistic and mesoscopic simulations
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Self-striking red glass fabrication at low temperature using gold nanoparticles
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Effect of zinc oxide loaded polyester fibers on the color, mechanical properties and antibacterial action of woven fabric
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Biogenic synthesis and antibacterial activity of silver nanoparticles (AgNPs) produced by Phomopsis sp. strain GFPA2
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Pr3+ doped BaO:ZnO:B2O3:TeO2 glasses for laser host matrix
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Effect of humic acid extracted from Thailand’s leonardite on rice growth
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Effect of carbon addition on microstructure and properties of boron-containing steel sintered under different atmospheres
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Properties of UV-curable screen printing inks containing oligolactide acrylates
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Optical and luminescence investigation of Er3+ doped in Na2O-Al2O3-P2O5 glasses for photonics material application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Study on structure and luminescence properties of LaBMoO6:Dy3+ phosphor for photonic material applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Carboxymethylchitosan-based hydrogels crosslinked with polydimethylsiloxane
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Shape-controlled synthesis of tungsten oxide nanostructures and characterization
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Characterization and photocatalytic activity of titanium dioxide deposited on stainless steel by pulsed-pressure MOCVD
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Temperature dependence of dielectric properties for BFO-BTO-BZT ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Thermal and mechanical properties of an epoxidized natural rubber composite containing a Li/Cr Co-doped NiO-based filler
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Simple and rapid preparation of CuO film using SILAR process for application as hole-transporting layer in p-i-n perovskite solar cell
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
The effects of concentrations of ZnO nanoparticles on dewetting suppression of PS thin films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Thermal correction Judd-Ofelt analyze of Eu3+ ion doped calcium gadolinium silicoborate oxyfluoride glass
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Synthesis of nanoparticulate Ti-doped ZnO by solution combustion technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Effect of chromium content on the three-body-type abrasive wear behavior of multi-alloyed white cast iron
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 1 (2018) - Original Research Articles
Influence of BLT content on phase structure and electrical properties of (1-x)BT-xBLT ceramic
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Methyl methacrylate magnetic molecularly imprinted polymer for gluten determination
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Effects of sulfur vulcanization system on cure characteristics, physical properties and thermal aging of epoxidized natural rubber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Comparison of ZnO film prepared by spray pyrolysis and screen printing methods
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Investigation on the tribological characteristics of lubricated Al2O3-TiC (AlTiC) surface
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Recovery of recycled poly(ethylene terephthalate) via melt mixing with poly(butylene succinate) and ultrafine wollastonite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Synthesis and luminescence properties of CaMoO4:Sm3+ phosphors for orange photonic materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 28 No. 2 (2018) - Original Research Articles
Recycled poly(ethylene terephthalate)/polypropylene/wollastonite composites using PP-g-MA as compatibilizer: Mechanical, thermal and morphological properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Antibacterial and physical properties of silver chloride-coated partially carboxymethylated cotton gauze
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Modification of optical and structural properties of DC magnetron sputtered tungsten oxide thin films for electrochromic application
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Improvement in the properties of silica-reinforced natural rubber with the sustainable interfacial modifier: Effect of molecular weight and content of interfacial modifier
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Wood plastic composites based on recycled poly(ethylene terephthalate) and poly(butylene adipate-co-terephthalate)
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
The use of reclaimed rubber from waste tires for production of dynamically cured natural rubber/reclaimed rubber/polypropylene blends: Effect of reclaimed rubber loading
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
One step pressing-annealing to produce LTP MnBi magnets
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Use of steam explosion as a green alternative method to prepare pulp from pineapple leaves
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Utilization of lignite ash as raw materials for ceramic tile
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Novel thermoplastic vulcanizates based on polyamide 12 blends: Influence of modified devulcanized natural rubber gloves on properties of the blends
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Isothermal aging of Al-Ni-Sc alloy containing Al3Ni microfibers and Al3Sc nanoprecipitates
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Effects of crosslinking agent and biological properties of silk fibroin/gelatin/chitosan ternary system electrospun nanofiber mats.
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Influences of chemical composition, microstructure and bandgap energy on photocatalytic and antimicrobial activities of ZnO and Ag-doped ZnO by solution combustion technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Photocatalytic and antimicrobial activities of SrxCa(1-x)TiO3 (x=0, 0.25, 0.5, 0.75 and 1) powders synthesized by solution combustion technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Phase formation of boron carbide powder synthesized from glutinous rice flour
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Effect of ethanol on hydrophilicity of the anodized films performed by two-step anodization at low current density
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
The influences of chemical treatment on recycled rejected fiber cement used as fillers in the fiber cement products
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Effects of the chemical treatment on coal-fired bottom ash for the utilization in fiber-reinforced cement composites
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Effects of surface modification processes on the adhesion of hydroxyapatite layers coated onto titanium substrates
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Utilization of aluminium buffing dust as a raw material for the production of mullite
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Influence of filler network on thermo-chemical de-vulcanization efficiency of carbon black filled natural rubber
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
Incorporating black dust into autoclaved aerated concrete wall for heat transfer reduction
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Original Research Articles
Corrosion behaviors of ship structural steel in simulated marine tidal environment
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 3 (2019) - Original Research Articles
The influence of precursors on optical properties of carbon nanodots synthesized via hydrothermal carbonization technique
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Failure analysis of superheat tube 2.25Cr-1Mo in biomass power plant
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 2 (2019) - Review Articles
Piezoceramic-polymer and piezoceramic-cement composites: A brief review
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Highly ordered porous PLA films prepared by breath figure method
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Microstructures and mechanical properties of 25Cr duplex stainless steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Preparation of alginate/2-hydroxyethyl methacrylate composite beads: Role of fillers and characteristics of bead formation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Development of Sr/Cao catalyst derived from cuttlebone (Sepia officinalis) for biodiesel production
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Preparation and characterization of lake pigments from sappan wood using Thai local clays
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Poly(ester urethane)-crosslinked carboxymethylchitosan as a highly water swollen hydrogel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
The luminescence, optical, and structural properties of SrMoO4:Ce3+ phosphor for photonics material applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Sm3+ ions doped zinc barium tellurite oxyfluoride glasses for laser materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Physical property and compressive strength of fired clay bricks incorporated with paper waste
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Effect of polystyrene molecular weight and zinc oxide concentration on dewetting behavior of polymeric thin films
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Production of silica-based ceramics sintered under nitrogen atmosphere from rice husk and sugarcane bagasse ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Tribology, mechanical properties and coloration of a mica glass-ceramic
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Effects of sodium silicate as liquid phase sintering additives on properties of alumina ceramics
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 4 (2019) - Original Research Articles
Electrodeposition of Zn/TiO2 composite coatings for anode materials of Zinc ion battery
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Incorporation of Fe and Cu for antibacterial performance enhancement of Fe-Cu-ZnO nanocomposites synthesized by a facile chemical precipitation
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Dry-sliding wear of the 316L/h-BN composites produced under crack ammonia atmosphere
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Properties of wood-plastic composites based on pvc/pla/pbat ternary blend
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Ultraviolet‐shielding and water resistance properties of graphene quantum dots/ polyvinyl alcohol composite-based film
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 1 (2020) - Original Research Articles
Influence of poly(butylene terephthalate) and wollastonite on properties of recycled poly(ethylene terephthalate) preforms
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Chitosan beads as the adsorbent for glyphosate removal from an aqueous solution
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 2 (2020) - Original Research Articles
Synthesis of hydroxyapatite from cuttlebone under various pH conditions: An approach for medical materials
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Microstructure evolution and mechanical properties of calcined kaolin processing waste-based geopolymers in the presence of different alkali activator content by pressing and casting
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Characterization of TiO2-activated carbon onto adsorption and photocatalytic properties and its application
Abstract PDF Supplementary A -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Dyeing properties and color fastness of eri silk yarn dyed with soaked red kidney bean water
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Screen printed textile electrodes using graphene and carbon nanotubes with silver for flexible supercapacitor applications
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
The usage of CoAl−layered double oxide for removal of toxic dye from aqueous solution
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 4 (2020) - Original Research Articles
Preparation and properties of fired clay bricks with added wood ash
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Investigations on phase coexistence and functional properties of BCZT lead-free piezoceramic
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 3 (2021) - Original Research Articles
Wollastonite and talc reinforced polypropylene hybrid composites: Mechanical, morphological and thermal properties
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 8 No. 2 (1999) - Academic Articles
Materials Engineering Approaches Towards Advanced Bioceramic Coating on Ti6A14V Implants
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 29 No. 1 (2019) - Original Research Articles
Photopumped laser diode continuous wave for optical gain determination of Nd:YVO4 and Nd:YAG crystal medium
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Original Research Articles
Optical properties of TiO2@Ag nanowires and nanospheres
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 31 No. 4 (2021) - Original Research Articles
Influence of graphite feedstock on the characteristics of silver-decorated graphene oxide and antimicrobial property
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 12 No. 2 (2003) - Original Research Articles
The Analysis of Low Cycle Fatigue Behavior in a Nickel Based Superalloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 32 No. 4 (2022) - Review Articles
Research progress of novel zirconium alloys with high strength and toughness
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 33 No. 2 (2023): June - Original Research Articles
Dielectric Properties and Electrochemical behavior of Graphene Oxide derived from Myanmar Coal Minerals
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Utilization of rice husk to synthesize high-performance phosphors
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 30 No. 3 (2020) - Review Articles
Review on the suppression of Zn dendrite for high performance of Zn ion battery
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 15 No. 2 (2005) - Original Research Articles
Effect of Final Cold Rolled Microstructures on Creep Deformation Behavior in Nickel Base Alloy
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 5 No. 1 (1995) - Original Research Articles
ALTERNATIVE RAW MATERIALS FOR MANUFACTURING FLAT PRODUCTS BY E.AF. ROUTE
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Burning temperature dependence of rice husk ashes in structure and property
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 13 No. 2 (2004) - Original Research Articles
STRESS EVOLUTION IN NICKEL BASED SINGLE CRYSTAL SUPERALLOY SUBJECTED TO THERMAL CYCLING
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 25 No. 2 (2015) - Original Research Articles
Effect of Ni on the formability and texture of hot rolled weathering steel
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 19 No. 2 (2009) - Original Research Articles
Influence of impurity ions on rice husk combustion
Abstract PDF -
Journal of Metals, Materials and Minerals Vol. 14 No. 1 (2004) - Original Research Articles
STUDY ON TRANSFORMATION BEHAVIOUR OF BULK Si-Mn TRIP STEEL
Abstract PDF