Dependence of electrical resistivity on plastic deformation in copper-aluminum alloy Cu0.975Al0.025
Abstract
We measure changes of electrical resistivity after a plastic deformation. We supposed that the changes are due to a large density of dislocation present in the polycrystalline samples; therefore, we also measure the amount of dislocations after the plastic deformation. Thus, for our aim, we elaborated copper-aluminum alloys Cu0.975Al0.025; next, with them, we fabricated metallographic specimens, which were submitted to traction subsequently. We measured the electrical resistivity before and after the traction. The obtained results are discussed in a theoretical framework of dislocations.
Downloads
References
Pavlov, P.V. and Jojlov, A.F. (1987). Física del estado sólido (Solid state physics). Mir Publishers Moscow.
Koehler, J.S. (1949). A calculation of the changes in the conductivity of metals produced by Cold-Work. Phys. Rev. 75(1) : 106.
Mackenzie, J.K. and Sondheimer, E.H. (1950). The theory of the change in the conductivity of metals produced by cold work. Phys. Rev. 77(2) : 26.
Landauer, R. (1951). Conductivity of cold worked metals. Phys. Rev. 82(4) : 520.
Dexter, D. L. (1952). Scattering of electrons in metals by dislocations. Phys. Rev. 86(5) : 760. Dexter, D.L. (1952). Conductivity of cold-worked metals. Phys. Rev. 85(5) : 936.
Macchioni, C., Rayne, J.A., and Bauer, C.L. (1982). Low-temperature resistivity of bulk copper- aluminum alloys. Phys. Rev. B. 25(6) : 3865.
Gupta, R.P. (1987). Residual resistivity of defects in metals. Phys. Rev. B. 35(11) : 5431.
Bian, Q. and Niewczas, M. (2016). Theory of magnetoresistance due to lattice dislocations in face-centred cubic metals. Philosophical Magazine. 96(17) : 1832–1860. Niewczas, M. (2014). Intermittent plastic flow of single crystals: central problems in plasticity: a review. Materials Science and Technology, 30(7) : 739–757.
Miranda Ramos, J.G. 2006. Licentiate Thesis entitled Resistividad eléctrica en función de la deformación plástica de la aleación de cobre con aluminio (Electric resistivity as a function of the plastic deformation of copper-aluminum alloy),UNMSM, Lima, Peru
Kuzmin, B.A., and Samojotski, A.I. (1986). Metalurgia, metalografía y materiales de construcción (Metallurgy, metallography and special-purpose materials). Mir Publishers, Moscow.
Lajtin, Y.M. (1973). Metalografía y tratamiento térmico de los metales (Metallography and heat treatment of metals). Mir Publishers Moscow.
Castillo, M.R. (2007). El Aluminio: Aspectos generales (Aluminum: General aspects). Universidad Bolivariana de losTrabajadores, Centro de Formación RIALCA, Venezuela. https://ubtjrialca.files.wordpress.com/2 012/02/elaluminio_y_su_desarrolloactu al1.pdf
AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Cracow, Poland. 2016. http://www.conductivity-app.org/singlearticle/cu-overview
Heaney, M. B. 1999. Electrical conductivity and resistivity IN ''Measurement, instrumentation, and sensors handbook CRCnetBase'' (Section VII: Electromagnetic Variables Measurement), Ed. John G.Webster. http://www.kelm.ftn.uns.ac.rs/literatur a/si/pdf/ Measurement%20Instrumentation%20 Sensors.pdf
Reed-Hill, R. E. 1971. Principio de metalurgia física (Principles of physical metallurgy). Editorial Continental S.A. México, España, Argentina, Chile.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
