Recovery of zinc from the spent zinc-carbon dry cell batteries through pyrometallurgical route

Authors

  • Majharul Haque Khan Materials and Metallurgical Engineering Department, Bangladesh University of Engineering and Technology
  • A.S.W. Kurny Materials and Metallurgical Engineering Department, Bangladesh University of Engineering and Technology

Abstract

Spent zinc-carbon batteries of all the five types (AAA, AA, C, D and 9V) were processed to recover zinc metal. All the components of the battery were separated, chemically analyzed and the anodic zinc parts were subjected to pyrometallurgical processing. Extraction of zinc was negligible when no fluxing agent was used. However, extent of recovery increased significantly when chloride salts: sodium chloride, calcium chloride and ammonium chloride were used as a fluxing agent. Among these, ammonium chloride gave the best result as flux. Using 10 %wt. of each flux, extraction of zinc was 90% for ammonium chloride, and around 75% for both sodium chloride and calcium chloride. A maximum 92% extraction of total zinc with purity over 99.5% could be obtained in presence of 12%wt. ammonium chloride flux by heating at 600°C for 10 minutes.

Downloads

Download data is not yet available.

References

Rabah, M.A. and Sayed, A.S. El. (1995). Recovery of zinc and some of its valuable salts from secondary resources and wastes. 37 : 23-32.

Strobos, J.G. and Friend, J.F.C. (2004). Zinc recovery from baghouse dust generated at ferrochrome foundries. 74 : 165-171.

Sayilgan, E., Kukrer, T., Yigit, N.O., Civelekoglu, G. and Kitis, M. (2010). Acidic leaching and precipitation of zinc and manganese from spent battery powders using various reductants. J. Hazard. Mater. 173:137-143.

Michelis, I., Ferella, F., Karakaya, E., Beolchini, F. and Vegilo, F. (2007). Recovery of zinc and manganese from alkaline and zinccarbon spent batteries. J. Power. Sources. 172 : 975-983.

Baba, A. A., Adekola, A. F. and Bale, R. B. (2009). Development of a combined pyro - and hydro - metallurgical route to treat spent zinc - carbon batteries. J. Hazard. Mater. 171 : 838-844.

Bernades, A. M., Espinosa, D. C. R. and Tenorio, J.A.S. (2004). Recycling batteries: a review of processes and technologies. J. Power Sources. 130 : 291-298.

Rabah, M. A., Barakat, M. A. and Mahrous, Y.Sh. (1999). Recovering metal values hydrometallurgically from spent dry battery cells. JOM. 51(12).

Bright, M.A., Deem, N.J. and Fryatt, J. (2007). The advantage of recycling metallic zinc from the processing wastes of industrial molten zinc applications., TMS.

Barakat, M.A. (2003). The pyrometallurgical processing of galvanizing zinc ash and flue dust., research summary. JOM.

Souza, C. C. B. M., Oliveira, D. C. a nd Tenorio, J. A. S. (2001) . Characterization of used alkaline batteries powder and analysis of zinc recovery by acid leaching. J. Power. Sources. 103 : 120-126.

Downloads

Published

2011-12-31

How to Cite

[1]
M. Haque Khan and A. . Kurny, “Recovery of zinc from the spent zinc-carbon dry cell batteries through pyrometallurgical route”, J Met Mater Miner, vol. 21, no. 2, Dec. 2011.

Issue

Section

Original Research Articles