Analysis of the influence of the loading rate on the mechanical properties of microalloyed steel

Authors

  • Mária Mihalikova Faculty of Metallurgy, Technical University of Košice

Keywords:

loading rate, strain rate, steel strips, strength properties, formability

Abstract

The aim of this paper is to analyse the influence of the loading rate in the range from 1 to 1000 mm/min, which corresponds to the tensile machine working range, on the strength properties and the formability characteristics obtained on standard and notched test bars made of steel strips. The combination of the loading rate and the test bar type made it possible to obtain the relationship of monitored variables in the strain rate interval from 10-4 to 10 s-1. In this interval, the strength properties of the tested strips thickness of 1, 1.5 and 1.8 mm increase exponentially, but formability does not change up to the strain rate of 1 s-1.

Downloads

Download data is not yet available.

References

Hrivňák, A. et. al. 1998. Technologická lisovateľnosť Oceľových Plechov. In : Materiál v inžinierskej praxi 98, Herľany. 14.-16(1) : 181.

Micheľ, J. 1996. Materiálové inžinierstvo. 3 (4) : 22.

Honeycombe, R.W.K-Pickering, F. B. 1972. Metallurgical Trans. 3 : 1099.

Čižmárová, E., Micheľ, J. 2003. Acta Metallurgica Slovaca. 9(2) : 90.

Čižmárová, E. et. al. 2002. Metalurgija. 41 : 285.

Micheľ, J., Buršák, M. And Mihaliková, M. 2005. Acta Metall. Slovaca. 11 : 134.

Janovec, J. And Ziegelhelm, J. 1999. Růst Úžitných Vlastností u Tekných Automobilových Plechů. Technológie 99, STU Bratislava. 8(9) : 319.

Bidulský, R., Rodziňák, D., Guzanová A. and Brezinová, J. 2006. Acta Metall. Slovaca. 12(1) : 54-58.

Downloads

Published

2017-04-23

How to Cite

[1]
M. . Mihalikova, “Analysis of the influence of the loading rate on the mechanical properties of microalloyed steel”, J Met Mater Miner, vol. 17, no. 1, Apr. 2017.

Issue

Section

Original Research Articles

Most read articles by the same author(s)