Comparison of ball-on-disc and Taber wear tests in assessing wear performance of electrolessly-deposited alloys

Authors

  • Kongkidakarn Theeratatpong Faculty of Engineering, Chulalongkorn University
  • Sawai Danchaivijit Faculty of Engineering, Chulalongkorn University
  • Yuttanant Boonyongmaneerat Metallurgy and Materials Science Research Institute, Chulalongkorn University

Keywords:

Taber wear, Ball-on-disc, Ni-P, Tribological properties, Electroless deposition

Abstract

In the industry, a Taber wear test is commonly employed to assess the wear resistance of coatings, which are applied on a panel of relatively large scales. On the other hand, other wear testing methods, such as ball-on-disc, is preferred in laboratory settings, as they require smaller test specimens and can determine coefficient of friction. In this study, we systematically compare the differences of Taber wear and ball-on disc by evaluating with an electrolessly-deposited Ni-P alloy systems. The Taber wear shows purely abrasive wear, whereas the ball-on-disc test offers a complex blend of wear mechanisms, and provides the coefficient of friction, useful for analyzing a wear loss measurement.

Downloads

Download data is not yet available.

References

Hari Krishnan, K., John, S., Srinivasan, K.N., Praveen, J., Ganesan, M. and Kavimani, P.M. (2006). An overall aspect of electroless Ni-P depositions-A Review Article. Metall. Mater. Trans. A. 37 : 1917-1926.

Agarwala, R.C. and Agarwala, V. (2003). Electroless alloy/composite coatings : A review. Sadhana. 28(3) : 475-493.

ASTM B733-97. (1997). Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal. West Conshohocken. PA 19428-2959.

Aly, I.H.M., Younan, M.M. and Nageeb, M.T. (2003). Autocatalytic (Electroless) Deposition of Ternary Nickel - Cobalt-Phosphorus Alloy. Trans. Inst. Met. Finish. 101 : 37-42.

Palaniappa, M. and Seshadri, S.K. (2007). Hardness and structural correlation for electroless Ni alloy deposits. J. Mater. Sci. 42 : 6600-6606.

Balaraju, J.N., Kalavati. and Rajam, K.S. (2009). Surface morphology and structure of electroless ternary NiWP deposits with various W and P contents. J. Alloys Compd. 486 : 468-473.

Wang, S.L. (2004). Studies of electroless plating of Ni-Fe-P alloys and the influences of some deposition parameters on the properties of the deposits. Surf. Coat. Technol. 186(3) : 372-376.

Rupert, T. J., Trelewicz, J. R. and Schuh, C. A. (2012). Grain boundary relaxation strengthening of nanocrystalline Ni-W alloys. J. Mater. Res. 27(9) : 1285-1294.

Sunwang, N., Wangyao, P. and Boonyongmaneerat, Y. (2011). The effects of heat treatments on hardness and wear resistance in Ni-W alloy coatings. Surf. Coat. Technol. 206 : 1096-1101.

Archard, J.F. (1953). Contact and Rubbing of Flat Surface. J. Appl. Phys. 24(8) : 981–988.

Krishnaveni, K., Sankara N., T.S.N. and Seshadri, S.K. (2005). Electroless Ni–B coatings : preparation and evaluation of hardness and wear resistance. Surf. Coat. Technol. 190(1) : 115-121.

Zhong-hou, L., Zhi-yong, C., Sha-sha, L., Feng, Z. and A-gan, D. (2008). Corrosion and wear properties of electroless Ni-P plating layer on AZ91D magnesium alloy. Trans. Nonferrous Met. Soc. China. 18(4) : 819-824.

Palaniappa, M. and Seshadri, S.K. (2008). Friction and wear behavior of electroless Ni-P and NiW-P alloy coatings. Wear. 265(5-6) : 735-740.

Downloads

Published

2014-12-31

How to Cite

[1]
K. Theeratatpong, S. Danchaivijit, and Y. Boonyongmaneerat, “Comparison of ball-on-disc and Taber wear tests in assessing wear performance of electrolessly-deposited alloys”, J Met Mater Miner, vol. 23, no. 2, Dec. 2014.

Issue

Section

Original Research Articles